WinDroid Toolkit v3.0 - [APPLY][UNLOCK][ROOT][FLASH]

Perfect All-in-one Toolkit for Novice

WinDroid Toolkit v3.0 is a perfect All-in-one toolkit for a novice. As from the WinDroid Changelog it has a new face-lift from the previous version v2.6 and many very useful features that I felt a newbies or a new owner of a Redmi Note 3 or the other Bootloader locked models has to try out. It is very simple Toolkit to utilize without the worries of drivers, custom recoveries images or Switch User access images. It simply all there, and for the advanced user you could sideload and do many more and download the on-demand specific drivers and files for your device.

Highlights:

• Support for Redmi Note 3
• Install specific USB drivers
• Application for Unlocking bootloader
• Facilitate Unlocking bootloader
• Flash TWRP 3.0.0 recovery
• Download SuperSU 2.65

Essentials:

• USB DATA cable (the one that came with your device)
• USB Port on your PC/Laptop
• Enable USB Debugging - Goto Settings > Additional settings > Developer options > USB Debugging - Enable (If you have not activated Developer options, then Goto Settings > About phone > tap MIUIversion 7 times > You are now a developer)

Requirements:
Download WinDroid Toolkit v3.0 and Create a folder "WinDroid Toolkit v3.0".

Using WinDroid Toolkit v3.0:
Plug your device in an ON-STATE via USB cable to your PC/Laptop. Then run the WinDroid Toolkit v3.0.exe. It will downlaod the necessry drivers and install accordingly. Next you will have to choose the your device from the scrolling menu. Choose Xiaomi/Redmi Note 3. It will then automatically download the TWRP recovery image and SuperSu zipped file for you to complete the rooting process. Its a 1-2-3 process, as shown below:-

At this stage you could see that the LED is RED, you just need to hit the Refresh button and it will then turn Green or Online accordingly, follow the Step One to Unlock Bootloader, as shown below:-

The first sub-menu is Request Unlocking permission and it will bring you to the Request Unlock page, as shown below:-

Then followed by Unlocking Bootloader and follow thru accordingly, as in the imagery:-

For Step Two, it is time to flash TWRP 3.0.0 recovery, as shown below:-

The last Step is to complete the Rooting process, which you need to install SuperSU v2.65 manually using TWRP 3.0.0 recovery, as shown below:-

Happy Rooting!

Credits:

• WindyCityRockr
• Rapscallion16
• TWRP 3.0 by jemmini
• SuperSU

DISCLAIMER: DO ON YOUR OWN RISK. Flashing can potentially bricked or bootloop your device.

"Solving with simplicity"

SP Flash TWRP3.0.0 for Redmi Note 3

Hello MIUI-ers...

Every now and then, I am doing testing towards going around the locked bootloader. This time using SP Flash Tool to flash TWRP for Redmi Note 3 as an alternative to flash TWRP recovery on a unlocked bootloader and ultimately rooting with SuperSU.

VERSION:

• Redmi Note 3 (MediaTek)

LIMITATION: 

• Unlocked bootloader.

PRE-REQUISITE:
DOWNLOAD:

• MediaTek USB VCOM drivers NOTE: WINDOWS 10 (32 & 64 bits) driver
• SP Flash Tool
• TWRP300_RN3_SPFlash©feds64
• UPDATE-SuperSU-v2.65

ESSENTIALS:

• Go to About phone > tap MIUI version at least 7 times to activate the Developer options. Go to Additional settings > Developer options > USB debugging > Enable it.
• Fully charged your device
• USB DATA cable that came with your device.
• Working USB port on your computer
• Switch off your device

STEP ONE:
After all the three zipped files are downloaded, leaving UPDATE-SuperSU-v2.65.zip alone, unzipped them accordingly, then start installing the MediaTek USB VCOM dirver or the Windows 10 driver whichever is applicable. Next, move the UPDATE-SuperSU-v2.65.zip to the Download folder on your phone for easy access, as shown below:-

STEP TWO:
After you unzipped the SP Flash Tool, launch the "Flash.exe" as shown below:-

STEP THREE:

Next click on the "Download Agent" and locate "DA_SWSEC.bin" from the unzipped SP Flash Tool folder earlier and click Open, as shown below:-

STEP FOUR:
Next click on the "Scatter-loading" button and locate the "MT6795_Android_scatter" from the unzipped "TWRP300_RN3_SPFlash©feds64" folder earlier and click Open, as shown below:-

STEP FIVE:
Since we are flashing the TWRP recovery, make sure the "recovery" box is ticked and unticked the "preloader" box, as shown below:-

STEP SIX:
Connect the other end of your USB DATA cable to the computer. 

Now click the "Download" button. 

DEVICE: (Still in Off-state mode) Immediately after clicking "Download" button, PRESS and HOLD the Vol (-) Down button, and connect the other end of the USB DATA cable to your device. Release the button after you see the big Checkmark which should be less than 10 seconds, as shown below:-

Unplug the USB DATA cable from your device.

STEP SEVEN:
Next what you need to do, to boot to the "TWRP 3.0.0 Recovery", you need to PRESS & HOLD the Vol Up + Power key simultaneously, and release when the Mi logo appear. Wait for a couple of second until the TWRP main menu appear, then tick "Only mount system read-only" as shown below:-

STEP EIGHT:
Next, flash UPDATE-SuperSU-v2.65, as shown below:-

After that is done, Reboot System. Now, we done flashing TWRP recovery using SP Flash Tool and rooting using UPDATE-SuperSU-v2.65.

CREDITS TO:

• TWRP
• TWRP 3.0 by jemmini
• SuperSU
• SP Flash Tool

RELATED THREAD:

SP Flash TWRP 2.8.7.0 for Redmi Note 3

NANDROID BACKUP for Redmi Note 3 [ROOTED]

DISCLAIMER: Always perform a NANDROID Backup before you endeavor into flashing or updating your ROM. Flashing can potentially cause a brick or a bootloop. DO IT ON YOUR OWN RISK.

“Solving with Simplicity”

SP Flash TWRP for Redmi Note 3

Every now and then, I am doing testing towards going around the locked bootloader. This time using SP Flash Tool to flash TWRP for Redmi Note 3 which in theory works for locked bootloader, BUT, I HAVE NOT MADE THE TEST ON LOCKED BOOTLOADER PERSONALLY. So for the time being, the limitation would still be in an UNLOCKED environment.

LIMITATION: 

• Unlocked bootloader.

PRE-REQUISITE:

DOWNLOAD:

• MediaTek USB VCOM drivers  NOTE: WINDOWS 10 (32 & 64 bits) driver
• SP Flash Tool
• TWRP_RN3_SPFlash_feds64
• UPDATE-SuperSU-v2.65

ESSENTIALS:

• Go to About phone > tap MIUI version at least 7 times to activate the Developer options. Go to Additional settings > Developer options > USB debugging > Enable it.
• Fully charged your device
• USB DATA cable that came with your device.
• Working USB port on your computer
• Switch off your device

STEP ONE:
After all the three zipped files are downloaded, leaving UPDATE-SuperSU-v2.65.zip alone, unzipped them accordingly, then start installing the MediaTek USB VCOM dirver or the Windows 10 driver whichever is applicable. Next, move the UPDATE-SuperSU-v2.65.zip to the Download folder on your phone for easy access, as shown below:-

STEP TWO:

After you unzipped the SP Flash Tool, launch the "Flash.exe" as shown below:-

STEP THREE:

Next click on the "Download Agent" and locate "DA_SWSEC.bin" from the unzipped SP Flash Tool folder earlier and click Open, as shown below:-

STEP FOUR:

Next click on the "Scatter-loading" button and locate the "MT6795_Android_scatter" from the unzipped "TWRP_RN3_SPFlash_feds64" folder earlier and click Open, as shown below:-

STEP FIVE:

Since we are flashing the TWRP recovery, make sure the "recovery" box is ticked and unticked the "preloader" box, as shown below:-

STEP SIX:

Connect the other end of your USB DATA cable to the computer. 

Now click the "Download" button. 

DEVICE: (Still in Off-state mode) Immediately after clicking "Download" button, PRESS and HOLD the Vol (-) Down button, and connect the other end of the USB DATA cable to your device. Release the button after you see the big Checkmark which should be less than 10 seconds, as shown below:-

Unplug the USB DATA cable from your device.


STEP SEVEN:

Next what you need to do, to boot to the "TWRP Recovery", you need to PRESS & HOLD the Vol Up + Power key simultaneously, and release when the Mi logo appear. Wait for a couple of second until the TWRP main menu appear, then tick "Only mount system read-only" as shown below:-

STEP EIGHT:

Next, flash UPDATE-SuperSU-v2.65, as shown below:-

After that is done, Reboot System. Now, we done flashing TWRP recovery using SP Flash Tool and rooting using UPDATE-SuperSU-v2.65.


CREDIT TO: TWRP 2.8.7.0 by Cloud & SP Flash Tool

RELATED THREAD:
NANDROID BACKUP for Redmi Note 3 [ROOTED]

DISCLAIMER: Always perform a NANDROID Backup before you endeavor into flashing or updating your ROM. Flashing can potentially cause a brick or a bootloop. DO IT ON YOUR OWN RISK.

“Solving with Simplicity”